Detailed Instructions

Detailed Instructions

Location

Divitium Nava
(Artificer's Islet, Temple of the Blessed Mantle, Empyreal Threshold)

Type

Book

Interact

Yes

Destructible

No

Detailed Instructions can be found during the Divitium Nava story chapter at the Seer Forge. It provides steps on constructing Canach's bypass device.

Story involvement

Visions of Eternity story

• The Only Way
  • Divitium Nava

Text

Device Constriction Details

---

Commander,

The following steps must be completed in order and with the utmost care and precision. There is some amount of danger if we do not proceed with caution and handle each item appropriately. We wouldn't want to scald that pretty face of yours. And by scald, I imply uncertain death.

Step One: First, you must take the sample of pyrite and break it down to a fine powder using the metalworking station's hammering function.

Step Two: Once you have the pyrite powder, bring it to me, and I'll prepare it for the next phase.

Step Three: While I'm working on that, you can extract the magical components, ideally using the following sequence, as that will create the most potent reaction:

• Use the preparation station to extract the ley energy.
• Next, use the preparation station to extract the seer magic.
• Finally, use the metalworking station to crack open the Inquest magitech container using the hammering function. Then use the preparation station to extract the energy.

Step Four: Once those are done, return to me. I should have what you need for the next steps.

Step Five: Take the solution that I give you and CAREFULLY use it with the following components at the preparation and metalworking stations. As before, completing these steps in the following sequence will produce the strongest chemical reaction:

• Before you can do any leaching, you must add the caustic solution to the preparation station.
• Hammer the saltpeter until it's crushed. If you've added the caustic solution to the station already, you should be able to leach the crushed saltpeter.
• Do the same and hammer the alum crystal into small chips. Then, you can leach them.
• Repeat the above steps with the oxidized copper hunk, but instead of hammering it first, you need to ablate it at the preparation station. After that, you can leach the refined oxidized copper hunk.

Step Six: While you are creating those components, I will take the crude oil and work it to create what we need. You needn't do anything with it, love.

Step Seven: Take the power cell to the preparation station and extract its power core.

Step Eight: Take the sheet metal to the metalworking station and choose the molding function-don't worry, I've already installed the casting shape we'll need. Then, take the molded casing to the finishing station and use the coat function on it to reinforce the material.

Step Nine: Take the hourglass to the finishing station; you'll want to apply a plating to the item.

Step Ten: Finally, take the leather straps to the finishing station and apply a good polish to make sure that it's supple and strong enough to use for carrying the device.

Related achievements

• The Only Way: Meticulous Craftsperson — Follow Canach's instructions to the letter; steps must be followed in the order given and without any mistakes. (1)